I originally set up a receiving station on an old iphone and used the beecon+ app. I thought beacons would be the best solution as they could both wear a ibeacon on their collars. After reading through this forum and your other micro-location information guides. Ultimately, I am attempting to create a micro-location system to determine when my dog and cat are outside. Or by having multiple receiving stations with different distance triggers? What are the options when it comes to receiving stations? I know of the various applications that have been recommended, I assume there is no other option beyond using an application. So, the only way people are able to perform micro locations utilizing beacons is by carrying a moving receiver (i.e. Is this capability not possible or am I just overlooking something obvious? I was able to set the X4 as a region, but I do not see where I can set triggers for the mobile iBeacon coming into range (at specific distance) to this beacon to trigger IFTTT. However, I am not seeing how to complete this option within the Beecon+ application. However, due to the limitations on the exit range trigger only being when the beacon goes out of range I thought I would purchase the RadBeacon X4 (weatherproof iBeacon) and use the proximity of the mobile beacon to this ibeacon as a trigger (such as near) instead of having to use the exit ranges. So when the mobile beacon comes into a specific range of receiving station it send IFTTT webhook to trigger Smartthings. I am using a stationary iPhone with Beecon+ as the receiving station. I am using the Dot as a mobile iBeacon (attached to person). I am attempting to use various iBeacons from Radius Networks. In order to re-enter normal operational model, simply remove and replace power to the device.I know this thread is very old, but I was wondering if anyone may be able to assist with utilizing various iBeacons with the Beecon+ app. Reboot the beacon into Direct Firmware Update mode.Ĭontact Radius Networks support for information on the procedure for firmware update or replacement. Press the Action Menu button and select DFU. In order to re-enter configurable mode for a RadBeacon X2, remove the front cover and switch the beacon power switch to OFF and back to ON.Ī beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again. In order to re-enter configurable mode for a RadBeacon Tag, remove the front cover and press the configuration push button switch near the coin cell battery. In order to re-enter configurable mode for a RadBeacon USB, remove and restore power to the device. The Lock feature is a security precaution to limit the possibility of third party manipulation of your beacons once they have been installed and configured. Submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service. Press the Action Menu button and select Lock. Submit a valid PIN to reset the settings for your beacon to factory defaults. Reset the device to the original factory settings. Press the Action Menu button and select Reset. Submit a new and existing PIN to update the PIN for your beacon. Press the Action Menu button and select Update PIN. Validate the accuracy of your beacon settings by quickly verifying the ranging behavior of your device in proximity to your configured beacon. Press the Action Menu button and select Range. Update the measured power value with the results of your calibration activity and update your settings. Press the Action Menu button and select Calibrate.Ĭalibrate the measured power value of the beacon settings to ensure optimal proximity events and ranging. Submit a valid PIN to update the settings for this beacon. Press the Action Menu button and select Apply. Select any RadBeacon in the table to view it's detailed settings. Each beacon discovered is displayed with the following summary details Scan for nearby configurable RadBeacons by swiping down on the RadBeacons table. Once discovered, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby configurable Radius Networks beacons. The RadBeacon app from Radius Networks requires an iOS iPhone, iPad or iPod touch running iOS 7.1 or higher and equipped with Bluetooth 4.0 capabilities. The RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services as well as other emerging proximity services.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |